New independent referral site, not the earlier users of this domain. Learn more

Mold Remediation in Jacksonville, FL

Mold remediation means fixing the moisture, removing mold-damaged materials under containment, cleaning what stays and confirming the area is dry. In Florida, mold work covering more than about 10 square feet is a licensed trade, and the company that assesses the mold generally can't be the one that removes it. Send a request and a licensed local provider may call you back.

Last reviewed November 2026

One provider per requestNever sold as a listDuval County & Orange Park, FL

Request a free quote

One local provider may call you back. No CAPTCHA.

By sending this form, you agree that Jacksonville Water Restoration Pros may share your details with one independent local provider, who may call or text you about this request. Consent isn't a condition of any purchase. We never sell your information. See our privacy policy and lead policy.

What to do right now

  1. Find and stop the water. Mold follows moisture: a slow drain leak, an AC line, a roof drip, or a damp crawl space.
  2. Leave it alone. Scrubbing, sanding or spraying bleach on large patches can spread spores and makes it harder to see the extent.
  3. Keep air moving out, not around. Close interior doors to the area and avoid running fans that blow across it.
  4. Lower indoor humidity. The EPA recommends keeping indoor relative humidity below 60%, ideally 30% to 50%. Running the AC and a dehumidifier helps.
  5. Photograph it and note when you first saw or smelled it, for your insurer or landlord.

Why mold shows up in Jacksonville homes

  • Humid air most of the year keeps indoor humidity high whenever the AC is off or undersized.
  • Raised floors over damp soil. In older neighborhoods such as Riverside and Ortega, many homes sit over crawl spaces, and with a high water table the ground underneath rarely dries out.
  • Closed-up houses. Seasonal homes and rentals left with the AC off are common sources of whole-house growth.
  • After leaks and storms. Anything that stays wet for more than a day or two can grow mold. The EPA's guidance is to dry within 24 to 48 hours.

Florida's rules in plain language

  • Licenses. Under Florida Statutes chapter 468, part XVI, people who assess or remediate mold for pay on jobs over about 10 square feet must hold a state mold assessor or mold remediator license. Look up any license at myfloridalicense.com.
  • Separation. A mold assessor generally can't remediate a property it assessed within the past 12 months, and the reverse applies too, with limited exceptions for certain contractors.
  • No referral fees between them. The law bars mold assessors and remediators from paying or taking referral fees from each other. This site never steers an assessment job to a remediator, or the other way around.

What remediation usually involves

A typical scope follows the IICRC S520 standard: containment with plastic sheeting and negative air pressure, HEPA air filtration, removal of moldy porous materials such as drywall and insulation, cleaning of the framing and other surfaces, drying, and a final visual check. Many homeowners then hire an independent assessor for post-remediation testing. The moisture problem has to be fixed first, or the mold comes back.

The process

  1. Assessment by a licensed assessor if the extent is unclear (testing is optional, not always needed).
  2. Moisture source repaired by the right trade.
  3. Containment and removal by a licensed remediator.
  4. Cleaning, drying and HEPA filtration.
  5. Clearance: a visual check and, if you choose, independent testing.

What it costs

From pricing:

Service Planning range
Mold assessment / testing $250–$650
Remediation, most projects $1,223–$3,758
Per square foot of affected area $10–$25
Whole-house remediation $10,000–$30,000

Crawl spaces, attics and HVAC involvement raise costs; small, accessible areas lower them.

Categories and the 10 square foot line

The EPA treats about 10 square feet (roughly a 3 ft by 3 ft patch) as the size most people can clean up themselves, using gloves, an N95 and detergent on hard surfaces. Florida's licensing law uses the same 10 square feet as the threshold for licensed assessment and remediation. Above it, or with mold in HVAC, hire professionals. Water category matters too: mold after a sewage or flood event (Category 3) usually means removing more material.

Documentation checklist

  • Photos of the mold and the moisture source, with dates
  • The assessor's report and lab results (if testing was done)
  • License numbers of the assessor and the remediator
  • The remediation scope, containment photos and final clearance
  • Receipts for repairs to the moisture source

When to call / when to wait

Call now if growth is larger than about 10 sq ft, is in the HVAC system, follows a sewage or flood event, or anyone in the house has asthma or a weakened immune system. It can wait if it's a small spot on a hard surface that you can clean and the moisture source is fixed.

Local proof

Dated, permissioned remediation photos and reviews will be added once providers supply them.

FAQs

Do I need mold testing?

Not always. If you can see the mold and know why it grew, testing adds cost without changing the fix. Testing helps when you smell mold but can't find it, or to check the result after remediation.

Can one company both test and remove the mold?

Generally not on the same property within 12 months. Florida separates assessors and remediators to avoid conflicts of interest, with limited exceptions.

Is bleach enough?

Not on porous materials such as drywall, and bleach doesn't fix the moisture problem. Small hard-surface spots can be cleaned with detergent and water.

My crawl space smells musty. Is that mold?

It may be. Damp soil under a raised floor can push humidity into the framing. Check wood moisture and humidity readings with the crawl space moisture checker, then ask a licensed assessor.

Does insurance pay for mold?

Many Florida policies limit mold coverage or cover it only when it follows a covered water loss. Check your policy's mold limit and ask your insurer.

How long does remediation take?

Small jobs can take a day or two; larger jobs with containment and rebuilding take longer. Drying the moisture source comes first.

Will mold come back?

If the moisture returns, yes. Fixing the leak, the drainage or the crawl-space humidity matters more than the cleanup itself.

Do landlords have to fix mold?

That depends on the lease, the cause and Florida landlord-tenant law. Report it to your landlord in writing with photos.

How do I check a mold license?

Search the provider's name or license number at myfloridalicense.com, the Florida Department of Business and Professional Regulation's lookup.

Water still coming in? Send one request.

Mold after a leak? Call (555) 000-0000 and a licensed local provider may call you back.