Crawl Space Moisture Checker
Many older Jacksonville homes, especially in Riverside, Avondale, Ortega and Arlington, sit on raised floors over a crawl space. This checker takes a few readings and tells you whether the wood and air down there are in a range that USDA researchers and the EPA link to mold and decay. It's a screening tool, not an inspection.
Last reviewed November 2026
Your result appears here after you answer the questions and press the button.
This tool gives an estimate for planning only. It is not a quote, an inspection or legal or insurance advice. A local provider, your insurer or a licensed professional makes the real call. Nothing you enter here is saved or sent; only the request form sends information.
Want a provider to look at it? Call or send the short form, and one local provider may contact you.
How the result is worked out
flags = []
if woodMC > 20: flags.push("High: wood above 20% MC") // USDA FPL: concern for mold and decay
if rh >= 80: flags.push("High: crawl air at or above 80% RH") // FPL example design target < 80%
else if rh >= 60: flags.push("Watch: crawl air 60–79% RH") // EPA keeps indoor RH < 60%
if standingWater: flags.push("Act: standing water or wet soil")
if cover != "intact": flags.push("Watch: soil not fully covered")
if dewOut > crawlTemp: flags.push("Note: outdoor air is damper than the crawl can handle; vents add moisture now") // FPL
result = High if any "High"/"Act" flag; Watch if any "Watch"; else Low
How to read your result
- Wood above 20% moisture content is where USDA Forest Products Laboratory researchers say concern about mold and decay begins. Readings well below that are the goal.
- Air at or above 80% relative humidity is above the target used in the laboratory's crawl space ventilation example. EPA advises keeping indoor humidity below 60%, ideally 30–50%.
- Vents don't always help. When the outdoor dew point is higher than the crawl space temperature, outside air brings in moisture that condenses on cooler wood and ducts.
- Closed crawl spaces need a ground cover, air sealing and conditioning or dehumidification to work.
- With the area's high water table, a crawl space can stay damp long after a leak is fixed. If you see growth over about 10 square feet, Florida requires a licensed mold remediator.
Example
Joist reading 23%, crawl RH 84%, torn vapor barrier, no standing water → High (wood over 20%, air over 80%) plus a Watch for the barrier.
Estimate only. General information, not an inspection. A provider's on-site readings decide what's needed.
FAQ
What meter do I need?
A basic pin-type wood moisture meter and a digital hygrometer. Take wood readings in a few spots, away from nails.
Should I close my crawl vents?
Not without a plan. Closing vents without a ground cover, sealing and dehumidification can make things worse. A provider or HVAC contractor can design it.
My result is High after a plumbing leak. What now?
Fix the leak, then get the crawl space dried and the wood rechecked. See mold remediation and water damage restoration.
Sources
TenWolde and Glass, "Moisture in Crawl Spaces," USDA Forest Products Laboratory (Wood Design Focus 23(3)); EPA, "A Brief Guide to Mold, Moisture, and Your Home"; USGS WRI 93-4130 (Duval water table); Fla. Stat. 468.8411.
Send a request
One local provider may call you back. No CAPTCHA.
Water still coming in? Send one request.
Call or send the short form, and one local provider may contact you.