Flood Cut Drywall Calculator
When floodwater soaks gypsum wallboard, FEMA's guidance is simple: if it wicked up 4 feet or more, remove the whole wall; if less, remove the bottom 4 feet. Enter how high the water marks go and how many feet of wall got wet, and this tool tells you how many square feet come out and how many 4×8 sheets go back. It gives area, not a price.
Last reviewed November 2026
Your result appears here after you answer the questions and press the button.
This tool gives an estimate for planning only. It is not a quote, an inspection or legal or insurance advice. A local provider, your insurer or a licensed professional makes the real call. Nothing you enter here is saved or sent; only the request form sends information.
Want a provider to look at it? Call or send the short form, and one local provider may contact you.
How the result is worked out
cut = (wetMark >= 48 in) ? wallHeight : 4 ft // FEMA 234: ≥4 ft wet → remove all; <4 ft → remove lower 4 ft
area = length × cut // sq ft removed
sheets = ceil(area / 32) // 4×8 sheet = 32 sq ft, hung sideways
How to read your result
- Why cut at 4 feet? Wallboard comes in 4-foot-wide sheets. Cutting at 4 feet means one replacement sheet laid sideways fills the gap with a single joint.
- Measure the wicking line, not the flood line. Drywall draws water upward, often well above where it stood. Moisture readings settle the question.
- Insulation behind the cut that got wet usually comes out too. Fiberglass batts hold water; foam may be dried and checked.
- Floodwater is Category 3, so removed material shouldn't be reused, and cleaning the studs is part of the job.
- Plaster walls in older Riverside, Avondale and Ortega homes follow different rules; ask the provider before anyone cuts. See Riverside and Avondale.
Example
Water stood 6 inches deep and the drywall wicked to 18 inches along 60 feet of wall faces in a slab home. The mark is under 4 feet, so cut 4 feet high: 60 × 4 = 240 sq ft. Sheets: 240 ÷ 32 = 7.5 → 8 sheets.
Estimate only. General information. The provider's moisture readings and the condition of the wall decide what's removed.
FAQ
Can I just cut at 2 feet if the water only reached 6 inches?
FEMA's guidance uses 4 feet so repairs line up with full sheet widths. Some providers cut lower when readings show dry board above; ask them to show the readings.
Does this tell me the cost?
No. For a planning range, see pricing; demolition and rebuild are priced by the provider who measures.
What about cabinets and baseboards?
Baseboards come off before the cut. Lower cabinets with particleboard boxes often don't survive floodwater; solid wood may be cleaned and dried.
Sources
FEMA 234, "Repairing Your Flooded Home" (FEMA and American Red Cross), section on walls; IICRC S500 water categories.
Send a request
One local provider may call you back. No CAPTCHA.
Water still coming in? Send one request.
Call or send the short form, and one local provider may contact you.